start:supp:ascii [barthel HF-Technik GmbH]

This application note provides examples for controlling a device using the ASCII protocol.

Transmit	Receive
SPC:CTL 1;	;	Set control to serial.
SPC:CTL?;	1;	Read control mode.
VERB 1;	OK;	Turns readable replies on.
SPC:MON 1;	OK;	Set channel 1 to monitor.
SPC:MON?;	1;	Read current monitor channel.
ON 1;	OK;	General output enable.
CH1:CUR?;	x;	Read current channel 1.
ON 0;	OK;	General output disable.